Jaga Facebook
Kopeeri link
Sensor: distance | reflective | 2.9÷5.5VDC | analog | Channels: 13
Sensor: distance | time-of-flight (ToF),ultrasonic | UART | 3.3VDC
Sensor: motion | microwave | digital | 5VDC | Channels: 1 | Gravity
Controller | Arduino | ATMEGA32U4 | 7÷12VDC | PWM: 7 | Anal.in: 12
Stepper motor controller | MP6500 | 1.5A | Uin mot: 4.5÷35V | red
Module: display | OLED display | FireBeetle | 3.7÷5.5VDC | I2C | 0.96"
Stepper motor controller | DRV8434S | SPI | 1.2A | Uin mot: 4.5÷48V
Module: safety | 20x28.5mm | 3g | 33VDC | 15W | 4.1Ω | 0.5mA
Module: converter | USB-UART | USB B mini | 5VDC | 921.6kbps
Motor: DC | with gearbox | 2÷7.5VDC | 600mA | Shaft: D spring | 357rpm
Sensor: pressure | analog | FSR 400 | Ø15mm | Range: 0,2÷20N
Module: relay | Channels: 2 | 12VDC | max.250VAC | 10A | GPIO | toff: 5ms
Module: power controller | ATX,pin strips | Application: ARDUINO
DC-motor driver | 100kHz | PWM | 1.9A | Uin mot: 4.5÷48V | Uin log: 5.5V
Sensor: current | 4.5÷5.5VDC | IC: ACS724 | 20.3x17.8mm | -2.5÷2.5A
Sensor: accelerometer | 3.3÷5VDC | I2C | H3LIS200DL | ±100g,±200g
Converter: step up | Uout: 3.3V | Uin: 0.5÷5.5V | 1.2A | 70÷90% | 12x15mm
Stepper motor controller | DRV8434S | SPI | 1.2A | Uin mot: 4.5÷48V
Sensor: distance | reflective | 2.9÷5.5VDC | digital | Channels: 9